b'3.The metal wall panels will be limited by wind load shown in the manufacturers specifications on the span certified for the product type, thickness, and configuration as per the products certified span tables. 4.The structural support members are designed and engineered separately as per project requirements by building designers and engineers. 5.Compliance with H1D7(5) is limited to the DeltaCool-EPS-FR & TPC panels being used in a wall configuration only, not as a roof. 6.The Group numbers have been determined in accordance with testing conducted to AS ISO 9705 and assessment against AS5637.1: 2015 as Group 1, refer A3. 7.When used as internal wall lining, this product as a Group 1 fire rated product, must comply with the group number specified in Table S7C4 of Specification 7 of the BCA 2022, Volume 1. Refer A3. 8.Compliance with BAL should be reviewed with the respective BAL requirements of AS 3959 by Building Designers & Authorities having jurisdiction as each building may require specific design or construction requirements outside of the specific wall material. 9.Bushfire Compliance is limited to the 100mm panel thickness or greater for the TPC core, and the 50-150mm thick EPS-FR Core, refer A3. 10.This certificate is limited to the details within this certificate including the above compliance elements, product description, purpose or use. 11.Other than the items and information listed, the remainder of the information contained in the products literature is outside the scope of this certification. 12.The use of the certified product/system is subject to these Limitations and Conditions and must be read in conjunction with the Scope of Certification below.Scope of certification: The CodeMark Scheme is a building product certification scheme. The rules of the Scheme are available at the ABCB website www.abcb.gov.au. This Certificate of Conformity is to confirm that the relevant requirements of the Building Code of Australia (BCA) as claimed against have been met. The responsibility for the product performance and its fitness for the intended use remain with the Certificate Holder. The certification is not transferrable to a manufacturer not listed on Appendix A of this certificate. Only criteria as identified within this Certificate of Conformity can be used for CodeMark certification claims. Where other claims are made in a clients Installation Manual, Website or other documents that are outside the criteria on this Certificate of Conformity, such criteria cannot be used or claimed to meet the requirements of this CodeMark certification.The NCC defines a Performance Solution as one that complies with the Performance Requirements by means other than a Deemed-to-Satisfy Solution. A Building Solution that relies on a CodeMark Certificate of Conformity that certifies a product against the Performance Requirements cannot be considered as Deemed-to-Satisfy Solution. This Certificate of Conformity may only relate to a part of a Performance Solution. In these circumstances other evidence of suitability is needed to demonstrate that the relevant Performance Requirements have been met. The relevant provisions of the Governing Requirements in Part A of the NCC will also need to be satisfied. This Certificate of Conformity is issued based on the evidence of compliance as detailed herein. Any deviation from the specifications contained in this Certificate of Conformity is outside of this documents scope and the installation of the certified product will not be covered by this Certificate of Conformity. Disclaimer: The Scheme Owner, Scheme Administrator and Scheme Accreditation Body do not make any representations, warranties or guarantees, and accept no legal liability whatsoever arising from or connected to, the accuracy, reliability, currency or completeness of any material contained within this certificate; and the Scheme Owner, Scheme Administrator and Scheme Accreditation Body disclaim to the extent permitted by law, all liability (including negligence) for claims of losses, expenses, damages and costs arising as a result of the use of the product(s) referred to in this certificate. When using the CodeMark logo in relation to or on the product/system, the Certificate Holder makes a declaration of compliance with the Scope of Certification and confirms that the product is identical to the product certified herein. In issuing this Certificate of Conformity, CertMark International has relied on the experience and expertise of external bodies (laboratories and technical experts). Nothing in this document should be construed as a warranty or guarantee by CMI, and the only applicable warranties will be those provided by the Certificate Holder.Certificate number: CM40365-I01-R00This certificate is only valid when reproduced in its entirety.Page 2 of 9'