b'` Certificate number: CM40365 Rev1 Certification Body: THIS IS TO CERTIFY THAT DeltaCool-EPS-FR & TPC ABN: 81 663 250 815 JASANZ AccreditationType and/or use of product:Description of product:No. Z4450210AK PO Box 273,Insulated wall panel.DeltaCool-EPS-FR & TPC are insulated wall panels comprising of either Expanded Palmwoods Qld 4555Polystyrene with Fire Retardant (SL Grade EPS-FR) core or Thermosetting Phenolic AustraliaComposite (TPC) core between steel skins. Refer A2 for further information.P: +61 7 5445 2199 www.cmicert.com.au COMPLIES WITH THE FOLLOWING BCA PROVISIONS AND STATE OR TERRITORY VARIATION(S)BCA 2022 (Amdt.2) office@cmicert.com.auVolume OneVolume Two Certificate Holder:Performance Requirement(s):Not ApplicableH4P7Condensation ManagementRefer to Limitation and condition 10 Deemed-to-Satisfy Provision(s):C2D11 (1)(b) & (i)Fire Hazard PropertiesWalls, Ceiling & OtherH1D7(5)Roof and wall cladding - Refer to Limitation and Delta Panels Pty LtdInsulative Material other than sarking - Refer A3condition 5 ABN: 11 147 861 292F3D5(1)(c)WeatherproofingWall claddingH2D6(4)WeatherproofingRoof and wall cladding 731 Boundary Road, Richlands, QLD, 4077G5D3Construction in bushfire prone areasRefer A3 andH6D2(1)(b)(i)Energy EfficiencyContributes to the overall energy Australia Limitation and condition 8 & 9efficiency of the building - Refer A3 Ph: 07 3271 2170J4D6Energy EfficiencyContributes to the overall energyH7D4Construction in bushfire prone areasRefer A3 and www.deltapanels.com.au efficiency of the building - Refer A3Limitation and condition 8 & 9State or territory variation(s): Not ApplicableNot Applicable SUBJECT TO THE FOLLOWING LIMITATIONS AND CONDITIONS AND THE PRODUCT TECHNICAL DATA IN APPENDIX A AND EVALUATION STATEMENTS IN APPENDIX BLimitations and conditions:Building classification/s:1.This product has not been tested to AS 1530.1-1994 and cannot be considered a non-combustible product.Class 1,2,3,4,5,6,7,8,9 & 102.BCA requires certain external walls, common walls or internal load bearing walls and/or ancillary elements of some Class 2 to 9 buildings to be non-combustible. In the absence of site-specific performance solution, this product or system is not suitable for use in these applications where a non-combustible product is required. Note, this product can be used as internal and external walls in class 1 & 10 buildings. 3.The metal wall panels will be limited by wind load shown in the manufacturers specifications on the span certified for the product type, thickness, and configuration as per the products certified span tables. Date of issue: 19/12/2025 Glen GugliottiCMIDon GrehanUnrestricted Building CertifierDate of expiry: 18/12/2026 Certificate number: CM40365-I01-R01This certificate is only valid when reproduced in its entirety.Page 1 of 8'