b'American Cooling Solutions 47920 W. 5th Street Canton, SD 866-736-7335www.americancoolingsolutions.com (25310) Hydraulic Oil Cooler Fan Control Module with Temperature Sensor 12V or 24V(1) Smart Fan Module (1) 35 Amp Fuse (6) Zipties (2) Ring Terminals(4) Butt Connectors (1) Temp Sensor (1) Fuse Holder (1) Heat Shrink(12") Solder (2) Gold Spade Terminals (1) White Mating Fan ConnectorOverview: The Smart Fan Module is the next generation of cooling fan technology. With the ability to be mounted virtually anywhere, we make the installation process as simple as possible with minimal work required. Our standard Module is programed to turn the fan on at 50% at 1 00 Degrees and linearly ramps to 100% at 130 Degrees. Installing module in vehicle: First mount the Standalone controller to secure location in vehicle [recommended inside engine bay) Double check screws for a secured mount. Wiring your fan In preparation of wiring first layout wire route to fan in engine bay. Make sure to keep extra slack for wire tieing in place. next, strip off 1/ 4" wire jacket from the black and red wire coming from the standalone controller. Using the provided Gold Terminals, crimp the terminal with a wire terminal crimper (see figure 6) or if you do not have a crimper, use needle nose pliers to crimp terminal around wire and solder wires to terminals for a secured connection (see figure 2-5) Lastly, insert gold terminals into white mating fan connector to corresponding colored wire from fan. (black toblack, red to red) once inserted, pull wire to check for a secured, locked connection in mating fan connector.FIG1FIG2FIG3 FIG4FIG 5FIGS'