b'DeltaDualCore Panel Awning Systems (v)Metallic flashing (d)As the DeltaDualCore panel constitutes a bonded laminate, the following restrictions shall apply to the portion of the panel that is within 900mm of the site boundary: (i)The laminas shall be restricted to steel facings with mineral wool core, each of which has been tested to AS1530.1 and are deemed non-combustible (refer to AS1530.1 fire test certificates in Section Appendix A). (ii)Each adhesive layer may not exceed 1 mm in thickness and the total combined thickness of adhesive layers may not exceed 2 mm (refer to Section Appendix E which confirms adhesive layer thicknesses are within the required limits). (iii)The spread of flame index and the smoke developed index of the bonded laminated material as a whole shall not exceed 0 and 3 respectively (refer to AS1530.3 test certificates given in Section Appendix D). (iv)Only the portion of each DeltaDualCore panel containing a mineral wool core shall comply with items i) to iii) in accordance with NCC H3D2(1)(g) (the panel is not intended to comply with NCC H3D2(1)(g) as a whole).Unless detailed otherwise above, all other systems shall be in accordance with the DtS provisions. 1.4Variations to DtS Provisions and Performance Requirements Table 1-1 lists the variations to the DtS requirements and the performance requirements as agreed by stakeholders.Table 1-1 Variations from BCA-DtS provisions and performance requirements.DtSIssuePerformanceIFEG Subsystems referenceRequirements 9.2.4(1)(a)Use of a Class 10a structure located betweenH3P1(1)AFire initiation and a Class 1 building and an allotment boundarydevelopment and (that is not a boundary with a road or othercontrolpublic space) and positioned within 900 mm of BSmoke the allotment boundary without a fire rated wall development and (FRL 60/60/60) between the Class 1 building spread and control and allotment boundary.1.5Details of Standards Referenced in Report The details of any acts, regulations, codes or standards which this report may reference are given in Table 1-2. Table 1-2. Details of Standards - informative. Reference in thisYear VersionTitle Report NCCNCC 2022 ABCB National Construction Code 2022, Building Code of AustraliaHousing Provisions Standard.NCCNCC 2022 ABCB National Construction Code 2022, Building Code of AustraliaVolume 2. Revision 1-117'