b'Certificate of Test QUOTE No.: NC8391REPORT No.: FNC12604COMBUSTIBILITY TEST FOR MATERIALS IN ACCORDANCE WITH AS 1530.1-1994 TRADE NAME:Mineral Wool / Rock Wool SPONSOR:Delta Panels Pty Ltd 731 Boundary Road RICHLANDS QLD 4077 AUSTRALIA DESCRIPTION OF TEST SAMPLE:The sponsor described the tested specimen as a mineral wool insulation slab comprised of a silicate fibres, alkaline oxide, alkali earth oxide, Bakelite synthetic thermosetting resin binder and mineral oil. Nominal thickness:50 mm Nominal density:100 kg/m 3 Colour:brown TEST PROCEDURE:Five (5) samples were tested in accordance with Australian Standard 1530 Methods for fire tests on building materials, components and structures, Part 1- 1994: Combustibility Test for Materials. An alternative suitable insulating material was used to fill the annular space between the furnace tubes, as specified in Clause 4.2 of ISO 1182:2010. RESULTS:The following calculated results were obtained, refer also to Summary of measurements: Arithmetic mean=Mean furnace thermocouple temperature rise ( o C)26.37 Mean specimen centre thermocouple temperature rise ( o C) 253.80 Mean specimen surface thermocouple temperature rise ( o C)36.60 Mean duration of sustained flaming (s)0 Mean mass loss (%)6.04 DESIGNATION:The material is NOT deemed combustible according to the test criteria specified in Clause 3.4 of AS 1530.1-1994. These test results relate only to the behaviour of the test specimens of the material under the particular conditions of the test and they are not intended to be the sole criterion for assessing the potential fire hazard of the material in use. DATE OF TEST: 8 July 2020 Issued on the 24 thday of July 2020 without alterations or additions.Faustin MolinaStephen Smith Testing OfficerTeam Leader, Reaction to Fire & Faade Fire Laboratory End of Report Copyright CSIRO 2020 . Copying or alteration of this report without written authorisation from CSIRO is forbidden . NATA Accredited Laboratory Number: 165 Corporate Site No 3625Page 1 of 2Accredited for compliance with ISO/IEC 17025 - Testing.'