b'Form 15Generic Compliance certificate for building design or specificationThis form is to be used by an appointed competent person for the purposes of section 10 of the Building Act 1975 and sections 73 and 77 of the Building Regulation 2021 (Design-specification certificate) stating that an aspect of building work or specification will, if installed or carried out as stated in this form, comply with the building assessment provisions.Additional explanatory information is included in the Appendix at the end of this form.1. Property description This section need only be completed if details of street address and property description are applicable. E.g. in the case of (standard/generic) pool design/shell manufacture and/or patio and carport systems this section may not be applicable. The description must identify all land the subject of the application. The lot and plan details (e.g. SP/RP) are shown on title documents or a rates notice.If the plan is not registered by title, provide previous lot and plan details. Street address XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXSuburb/localityXXXXXXXXXXXXXXXXXXXXXXXXXXXX State QLDPostcodeXXXXXXXXXXXXXXXXXXXXXXXXXXXX Lot and plan details (attach list if necessary) XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Local government area the land is situated in XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX 2. Description of aspect/s certified Clearly describe the extent of work covered by this certificate, e.g. all structural aspects of the steel roof beams. Summermore Pty Ltd confirm that we have designed the Delta Beam Steel Span Tables (attached). 3. Basis of certification Detail the basis for giving the certificate and the extent to which tests, specifications, rules, standards, codes of practice and other publications were relied upon. National Construction Code of Australia 2022 AS/NZS 1170.0:2002 Structural Design Actions Part 0General Principles AS/NZS 1170.1:2002 Structural Design Actions Part 1Permanent, Imposed & Other Actions AS/NZS 1170.2:2021 Structural Design Actions Part 2Wind Loads AS 4055:2021 Wind Loads for Housing AS 4100:2020 Steel Structures Code AS/NZS 4600:2018 Cold Formed Steel Structures 4. Reference documentation Clearly identify any relevant documentation, e.g. numbered structural engineering plans. DeltaBeam Span Tables (5 Sheets Attached) Dated 02FEB2024Building Regulation 2021Section 73 and 77Form 15Version 2March 2023 Page 1 of 2'