b'INSTALLATION INSTRUCTIONSHow to set up your Blue Performance BUNK NETBlue Performance bunk net keeps you from rolling out of bed in rough weather1 Remove the mattress. 2Place the bunknet with silver3Choose a hole in the webbing side up. Check if final closest to the front edgeheight of the of the seat.bunknet is ok. Fix 5 x screwthroughtthe webbing.4Cut the remainder of the webbing5Make a connection from a fixed6Stow away underneath the in between the stitching andpoint on the boat to the D-ringsmattress when not used.dispose. fitted on the ends of the bunknet.Installation of Blue Performance COCKPIT, BULKHEAD & CABIN BAGSBlue Performance cockpit, bulkhead and cabin bags are clipped on to small white hooks screwed into the boat. Bags can be removed easily for stowage1Choose the right location2Using the drill pattern supplied3Screw the small white Blue on board drill four 3 mm holes in the boatPerformance hooks in place, using for each corner position the countersunk screws provided4Place upper5The back of each6The elastic loops hold the bag loops on upperproduct has loopssecurely in place and are tagged hooks in each corner.to assist clipping them on and offHang the top two cord loops over the hooks and stretch the two bottom elastic loops over the lower hooks30'