b'ENGINEERING NOTESBEAM TYPESManufactured from high tensile steel, DeltaBeam TMis engineered and tested to comply with AS 1397-2011. Major components are made from strong high tensile steel, while the fixings and brackets are galvanised for a long, useable life.DELTABEAM TMSPECIFICATIONSHeight 100 150 200 250 300Base Metal1.0mm 1.2mm 1.2mm 1.6mm 1.6mmThicknessYield Strength 550MPa 550MPa 550MPa 550MPa 550MPaWidth 65mm 65mm 65mm 65mm 65mmSTEEL COMPONENTSAll Steel structural components of the Delta Panels Awnings, Patios & Carports Kits systems are in accordance with the following Australian Standards:Delta Insulated Panel Top Skin AS 1397-2011Delta Insulated Panel Bottom Skin AS 1397-2011Delta BeamAS 1397-2011Posts ( Square Hollow Sections)AS 1163-2016The following minimum grades are required for theses steel components:- All Posts to be Grade C350LO- All Plates are Grade 250 U.N.O- All External Steelwork to be Hot Dip Galvanised including Fixings Note: Duragal is not an adequate substitute for hot dip galvanising- All Bolts are Grade 4.6/S & Welds SP, class 4mm continuous fillet weld U.N.O.FIXINGSAll fixing components of the Delta Panels Awnings, Patios & Carports Kits systems are in accordance with these Australian StandardsBolts shall be grade 4.6 or greaterAS 1110.1-2015Fixing Screws shall be class 3 AS 3566-20024E: info@deltapanels.comHead Office: 731 Boundary Road, Richlands, Qld 4077+61 7 3271 2170 Version Date:5ABN: 11 147 861 292W: www.deltapanels.com Sydney Depot:11 The Old Northern Road, Narellan, NSW 2567 +61 02 4611 7712 08.05.2023'