b'Seal/Repair KitsHarken offers seal and repair kits for cylinders and vangs. A seal kit includes the static gland seals, piston seal, rod seal and wiper, and set screws. A repair kit additionally includes wear bands, port fittings, pin end fasteners, and other required components when needed. If a cylinder was sold prior to 2014 please contact Harken to confirm the seal or repair kit part number. Cylinders sold after 2014 will have a "K" at the end of the part number.Seal/Repair Kit Part NumberHYKRCSXXXXXKType Sold After 2014 R = Repair (If sold before 2014 please contact Harken)S = Seal RodCylinder Type Bore S = Single/Double ActingP = Double PullOrdering Single-Acting & Double-Acting CylindersTo order use the chart below. Standard cylinders are black hardcoat-anodized with clevises on both ends. Additional cylinder and rod end options of marine eyes, barrel pin eyes, lashing eyes, and blank end fittings are available for a slight upcharge. For optional materials and fittings, replace the last three letters of the part number with your selections.Standard Cylinder Part NumberHYCS035130350BCCCylinder Cylinder end fittings Action type C =Clevis: (standard)S = Single-acting B =Barrel-pin eyeD = Double-acting L = Lashing eyeBore diameter (mm) M =Marine eye Rod diameter (mm) X =Blank Stroke length (mm) Rod end fittings MaterialsC =Clevis: (standard)B = Black hardcoatL =Lashing eye(standard) M =Marine eye C = Clear-anodizedN =No fittingaluminum Materials Rod End Fittings Cylinder End FittingsHardcoat Clear-anodized Clevis LashingMarineNo fitting Clevis LashingMarineBarrel-pinBlankeye eye eye eye eye249'