b'-MW SPECIFICATIONSDeltaCool-MW Single Span Non-Cyclonic TablesSpan Pressure (kPa)mm 75mm 100mm 150mm1800 2.47 3.30 5.00 Detail A2400 1.93 2.57 4.013000 1.43 1.90 2.99 0.60mm DeltaCool-MW Bracing Capacity3600 1.18 1.57 2.40 Panel Height (m) 2.4 1.2* 4.8*4200 1.02 1.35 2.034800 0.85 1.13 1.69 Kn/m 5.0 10.0 2.55400 0.71 0.94 1.41 Bracing Units (BU) 100 200 506000 0.60 0.80 1.20*Figures for 1.2m & 4.8m high panels are extrapolated. It is acceptable to extrapolate Bracing Capacity heights DeltaCool-MW Multi Span Non-Cyclonic Tablesbetween 1.2m & 4.8m. For heights outside of this dimension range, Diaphragm Analysis is required to establish Bracing Span Pressure (kPa) Capacity.mm 75mm 100mm 150mm Shear Load Transference- Shear load is transferred by rivets 1800 1.98 2.64 3.96 into the floor / ground surface or the perpendicular walls, ceiling & roof at a rate of 1.21 kN per 4.0 mm diameter rivet.2400 1.55 2.06 3.09 Fixing rivets at 200mm centres complies with the 20-minute 3000 1.14 1.52 2.28 flamebarrierrequirementsanddelivers14.5kNofshear capacity transfer per panel (6 on each side) horizontally, and 3600 0.95 1.25 1.88 12.1 kN per metre in vertical joints. Limited by the ability of the 4200 0.83 1.09 1.64 panel to transfer the shear.4800 0.71 0.94 1.415400 0.62 0.82 1.23 DeltaCool-MW Acoustic Values6000 0.57 0.76 1.14 75mm 125mmFrequency STC 24.00 23.00DeltaCool-MW Internal Application RW 25.00 24.00Span Pressure (kPa)mm 75mm 100mm 150mmWalls 7300 8500 9600(Non Load Bearing)Ceilings 3500 4500 4200Version Date: 12.05.2022Delta Panels Pty Ltd Delta Panels Pty LtdP: +61 07 3271 2170E: info@deltapanels.com W: www.deltapanels.comA: 731 Boundary Road, Richlands, Qld 4077 ABN: 11 147 861 292 P: +61 07 3271 2170E: info@deltapanels.com W: www.deltapanels.comA: 731 Boundary Road, Richlands, Qld 4077 ABN: 11 147 861 292'