b'Spread of FireDelta MW and EPS Panel Class 10a Awning and Patio Roof System meet the performance requirements of H3P1(1) Volume 2, NCC 2022 when installed in accordance with the Delta Mineral Wool Panels_V24.07.03 and Section 4.4 (SOTERA Pty Ltd; Fire Engineers Report; Delta MW and EPS-FR Panel Class 10a Awning and Patio Roof System; Rev 1-4; Dated 17/01/2023) as a Class 10a structure (awning or patio roof) attached or adjacent to a Class 1a building positioned directly adjacent to the site boundary (i.e. less than 900 mm from the site boundary). The comparative assessment has demonstrated qualitatively and quantitatively that the Delta MW and EPS Panel Class 10a Awning and Patio Roof System (when installed to the requirements of Section 4.4 (SOTERA Pty Ltd; Fire Engineers Report; Delta MW and EPS-FR Panel Class 10a Awning and Patio Roof System; Rev 1-4; Dated 17/01/2023)) does not increase the risk of fire spread from or to an associated Class 1 building when compared to the DtS base case.Performance requirement H3P1(1) is satisfied. The assessment is compliant in accordance with A2G2(1)(b) and A2G2(2)(d). Source: SOTERA Pty Ltd; Fire Engineers Report; Delta MW and EPS-FR Panel Class 10a Awning and Patio Roof System; Rev 1-4; Dated 17/01/2023. A4 Manufacturer and manufacturing plant(s) Delta Panels Pty Ltd 731 Boundary Road, Richlands, QLD 4077. A5 Installation requirements Compliance with H3P1(1) requires installation to be in accordance with the Delta Mineral Wool Panels_V24.07.03, the following relevant Technical Data Sheets and Section 4.4 (SOTERA Pty Ltd; Fire Engineers Report; Delta MW and EPS-FR Panel Class 10a Awning and Patio Roof System; Rev 1-4; Dated 17/01/2023). DeltaOrb-MW_V24-07-03 DeltaTrim-MW_V24-07-03 DeltaOrb-EPS-FR_V24-07-03 DeltaTrim-EPS-FR_V24-07-03 A6 Other relevant technical data No other relevant technical data.Certificate number: CM40346-I02-R00This certificate is only valid when reproduced in its entirety.Page 5 of 6'