b'STEP 7CALCULATE THE UPLIFT ON THE POSTSStep 7.1 Select the Load Width on each Post, refer to the diagram below:SINGLE-SPANFigure A10Load Width - Post 1 = Half (0.5) of A metres + C metersLoad Width - Post 2 = Half (0.5) of A metres + D metersMULTI-SPANFigure A11Load Width - Post 1 = Half (0.5) of A metres + C metersLoad Width - Post 2 = Half (0.5) of A metres + Half (0.5) B metersLoad Width - Post 3 = Half (0.5) of B metres + D metersStep 7.2Calculate the UpliftUplift on the Post (kN) = Uplift on the Beam (kN/m) x Load Width of the Post (metres).ABN: 11 147 861 292E: info@deltapanels.com P: +61 7 3271 2170 W: www.deltapanels.com Version Date:42A: 731 Boundary Road, Richlands, Qld 4077Sydney Depot: 11 The Old Northern Road, Narellan, NSW 25672024-03-24'