b'Fire assessment report R1.0 5.0Schedule of componentTable 5 describes the tested system and lists the schedule of components. These were provided by the test sponsor and surveyed by Jensen Hughes. All measurements were done by Jensen Hughesunless indicated otherwise. Detailed drawings of the test specimen are provided in Appendix B. Table 5 Schedule of components ItemDescription Lining 1.Product nameDeltaCool 100 mm thick smooth panelMineral wool core MaterialNominated by the supplier: the tested panels consisted of a 99 mm thick mineral wool core sandwiched between two 0.65 mm thick roll-formed painted steel skins. The panels were joined along the vertical joint, where one edge has a tongue, while the other edge has a groove. The tongue edge locks into the groove edge of the next panel. SupplierDelta Panel Measured size2400 mm tall1219 mm (overall)/1200 mm (effective face) wide100 mm thick MassPanel mass per unit length: 26.4 kg/mmeasurementsCore volumetric density: 106 kg/m 3Batch80015 ColourSteel skinwhite painted (outer face) Core - khaki InstallationThe wall panels were slotted into 100 mm wide channels (item 2) that were fixed to the floor. The wall panels were joined via the 9 mm long tongue and 10 mm deep groove edges except for the corner joints which were mitre joined via 45 tapered faces. The ceiling panels were then slotted into the grooves60 mm deep100 mm high - at the top of the wall panels. The panels closest to the doorway were capped using 100 mm channels (item 2) while all the internal corners were capped using 50 mm equal angles (item 3). All the tongue and groove joints were sealed on the exposed side using FR sealant (item 4) and 4 mm rivets (item 5) fixed at 300 mm centres. Capping 2.Item name100 x 40 x 1.2 BMT steel painted channel Dimensions2400 mm long108 mm wide41 mm flanges with a total thickness of 1.3 mm (overall)/1.2 BMT MaterialPainted steel SupplierDelta Panel BatchUnknown InstallationUsed to cap the end of the panels (item 1). Also used as base channel for the wall panels. 3.Item name40 x 40 x 1.2 BMT steel painted equal angle Dimensions2400/3600 mm long41 mm41 mm with a total thickness of 1.3 mm (overall)/1.2 BMT MaterialPainted steel SupplierDelta Panel Page 9 of 21 Copyright 2025 Jensen Hughes, Inc.All Rights Reserved. T1124 PAC'