b'Cylinder Blocks & Toggles HYDRAULICSRod End Blocks Q &Cylinders can be set up to use a reverse purchase to move loaded linesAcontrolling functions such as Cunninghams, stay deflectors, travelers, andWHY AREN\'T THE SHEAVES athwartship jib systems. Harken offers a variety of blocks to help facilitate differ- ON YOUR CYLINDER ROD END ent reverse purchase arrangements. Blocks are rigid when mounted to the rod.DOUBLE BLOCKS STACKED? They are available in single, single with becket, and double versions for reverseAlthough slightly longer than purchases from 1:2 to 1:4. Custom lashed on V block options are availableblocks with stacked sheaves, upon request. our reverse purchase rod end Eye/Jaw Toggles blocks allow the sheaves to align An eye/jaw toggle provides a cylinder with two axis points of articulation tothe load directly with the cylinder, reduce wire, rod, and end fitting fatigue. Toggles are available in 11 - 44 mmpreventing premature wear and (7/16" - 1 3/4") to match cylinder pin sizes. Eye/jaw toggles are commonly soldseal failure.with Harken integral backstay cylinders as well as standard cylinders used for standing rigging.HYCBS11 HYCBD11HYCBS13 HYCBD13HYCBS16 HYCBB16 HYCBD16HYCBS19 HYCBB19 HYCBD19HYCBS22 HYCBB22 HYCBD22ROD END BLOCKSLengthCylinder with V block custom configurationEYE/JAW TOGGLESRod End Blocks Eye/Jaw TogglesFits rod Rod threadSheave Part Jaw/pinLength Fits bore/rod Partsize WeightLength Reverse No. in mm in mm mmNo. Description mm UNF A kg in mm in mm purchase 7/1611.12.050.825/11 HYHTEJS11 HYCBS11110.44 2.0524.01011:21/212.72.235/13 Single7/16-20HYHTEJS1355.9 HYCBD11Double*117/16-200.56 2.0, 1.352, 335.51391:3, 1:45/815.92.563.540/16 & 45/16 HYHTEJS16 HYCBS13Single131/2-200.44 2.0524.01011:23/473.755/19 HYHTEJS1919.12.9 HYCBD13Double*131/2-200.55 2.0, 1.352, 335.51391:3, 1:47/822.23.365/22 HYHTEJS2283.8 HYCBS16Single165/8-180.80 3.2825.21:213.79475/25 13225.4 Single/becket165/8-180.97 3.2827.41:3HYHTEJS251 1/828.64.1104.1 HYCBB16188HYHTEJS2980/25 HYCBD16Double165/8-181.02 3.2, 2.082, 527.51:41 1/431.84.5114.390/32 189HYHTEJS32 Single193/4-160.99 3.2821441:234.95.6142.2100/32 HYCBS195.7HYHTEJS351 3/8 HYCBB19Single/becket193/4-161.24 3.2827.91:31 1/25.7115/35 200HYHTEJS3838.1144.5 HYCBD19Double193/4-161.29 3.2, 2.082, 527.92011:41 3/444.57.2182.6130/38 HYHTEJS44 HYCBS22Single227/8-141.69 4.31087.41:2 189 HYCBB22Single/becket227/8-142.19 10.82751:3 4.3108 227/8-142.38 4.3, 3.2108, 8210.9278 HYCBD22Double1:4 *Can be used as becket block. Maximum working load is equal to maximum pull force for appropriately sized cylinder.239'