b'Aluminum Tiller ExtensionThe rigid anodized body of this tiller extension transmits subtle boat and rudder movements, allowing the skipper to steer by the feel of the helm. The simple and lightweight design has no unnecessary frillsevery aspect contributes to its strength, stiffness, or comfort. The universal joint and nonslip7101foam grip are UV-protected and perfect for full dagger-grip and fingertip steering. Base cover snaps off to remove tiller extension.7102 Universal joint rotates 360.7100.247100.307100.337100.367100.427100.48 Nonslip foam rubber grip.Tube FastenerPart LengthWeight spacing Fasteners JointTube No. Description in mm in mm oz g in mm in mm type materialTiller extension23 5/8 600 5/8164.11171 1/431.83/165Universal 7100.24Aluminum 7100.3029 1/2 750 5/8164.91381 1/431.83/165UniversalAluminum Tiller extension 7100.33Tiller extension31 1/2 800 5/8165.21491 1/431.83/165UniversalAluminum7100.36Tiller extension35 7/16 900 5/8165.61601 1/431.83/16UniversalAluminum 5 7100.42Tiller extension41 3/8 1050 166.31 1/431.83/165UniversalAluminum 5/8178 7100.4847 1/4 1200 5/8161 1/431.83/165UniversalAluminum Tiller extension7.1203 31.8 7101Tiller extension base*1 3/4440.1851 1/43/165 7102Replacement universal joint160.4613Universal 5/8 *Fasteners not includedHalyard TensionersDesigned for rope or wire halyards on large cruisers, the Harken halyard tensioner locks halyards at full hoist and frees your halyard winch for other functions.The one-piece aluminum car body is Hard Lube-anodized for durability. Track is extruded from 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface.Choose the 40 mm version in single-pin, double-pin, or triple-pinHC9733configurations based on required working load. 32 mm version availableHC9503 HC9639 To lock pin in up position, pull the in single-pin only. Custom cars can be designed to handle higher loads.HC9953 HC9504 handle up with a lanyard or by hand and twist 90 degrees.Part Length Width Weight Maximum working loadNo. Description in mm in mm oz g lb kg32 mm T-TrackHC9639Single-pin car61522 1/45752966153000 18.67 HC9733Self-locking 32 mm track29 1/27501 1/43240 mm T-TrackHC9504Single-pin car6 5/161602 9/1665.120.3457788184000HC9503Self-locking 40 mm track for single/double pin7501 9/164031.39890 29 1/2HC9953Self-locking 40 mm track for single/double pin59 1/1615001 9/164060.561717 93'