b"TravelerPart numbers represent hardware most commonly used. C A CStandard boat length*: Small Boat: 6.7 - 8.5 m (22 - 28')Midrange: 8.8 - 10.4 m (29 - 34') BBig Boat:10.7 - 12.8 m (35 - 42') 2:1*Refer to Ordering Mainsail Travelers for in-depth2:1 Cam on Car: This system features cleats on adjustable arms that can be specifications by boat type.angled. On flush-deck boats, face cleats down the length of the track. On boats with seat backs, angle the cleats forward or aft.B ADiagram Small Boat Midrange Big BoatRef. Description Part No. Part No. Part No.2:1 Cam on Car CA Traveler 2734 3:1B Track 2720C Eyestrap 073 B A B3:1 Windward SheetingA Traveler 2745 1635 2746 1636 B End control 2740 16314:1 CC Track 2720 R27Windward Sheeting: The windward sheeting traveler lets crew pull the car above 4:1 Windward Sheetingthe centerline without releasing the leeward control line. Tack and the car stays A Traveler1635 3177 in the same position, ready to be pulled to the new windward side.B End control1631 3168C TrackR27 R322:1 Remote Cleat B A BA Traveler 2728B Eyestrap 137C Track 2720 CD Cam cleat 150 2:1Standard 3:1A Traveler 2731 T2731B T3231B D DB Control block 348 2:1 Remote Cleat: Use this 2:1 system on flush-deck boats like the J/24 where C End control2743 E2756 E3256 crew sit outboard of the traveler and loads are nearly vertical.D Track 2720 R27 R32Standard 4:1A Traveler 2727 T2742B T3242B C B A B CB Control block 342C End control2743 E2756 E3256 DD Track 2720 R27 R32 3:12:1 with Dedicated WinchA Traveler T3222B.HL Standard 3:1: This system, with cleats on the track, is used on boats B End control E3230.HL under 10.7 m (35').C Winch 46.2STA C B A B CD Track R32D 4:1 DStandard 4:1: This 4:1 system is used on moderately-sized cruising and racing boats. Control blocks and cleats mount on track ends.B BD A2:1C C2:1 with Dedicated Winch: Install this system on big boats when winches are used to adjust the traveler. 260"