b'18 mm Switch T-Track Battcar Systems 18 mm 4 mm11/16"For masts with sail grooves, 18 mm slug-mount5/32" 15 mmtrack uses a unique system that allows mast-up19/32"installation. Use high-load slug-mount tracks on boats over 12.2 m (40\') at sail headboard locations at full hoist and headboard locations when sail is21 mmreefed. Drill/tap track and switches fit masts with- 27/32"out sail grooves. Join drill/tap track sections withHC8800splice links. Order one per track section. BoatsHC9106 HC8918 HC8811with larger sail areas should use long switches to accommodate more cars. 18 mmMounting Kits and Endstops HC9107 HC8919 11/16" 4 mmSlug mounting kits are available for flat or round5/32"mast grooves. Order one kit per track section. 12.7 mmSwitch track includes screwpin stops for easy car1/2"and sail removal below switch. Stop at mastheadHC9108 HC8921also included. HC7827HC9597About Switch T-Track Battcar systems: see feature pages at beginning of this section.HC8230HC8918 HC9106HC8919 HC9107 HC8800 HC8798HC8921 HC9108 HC8811 HC8799SLUG MOUNTMounting Kits: Slug Mount HC7827Mounting slug Connector slug Flat mast groove gap HC10417Part Length Weight MountingLength Weight ConnectorMin MaxNo. Description in mm oz g slugs/kit in mm oz g slugs/kit in mm in mmSwitch Mounting KitsHC8918Round mast groove2510.323 9 HC8919Flat mast groove1 3/4450.2835/1687/1611 8 HC8921Wide1 3/4450.561637/16115/816at mast groove Track Mounting KitsHC9106Round mast groove3/4190.144192 5/8670.54151HC9702Round mast groove, extras*3/4190.1410 4 HC9107Flat mast groove3/4190.17192 5/8670.61715/1687/1611 5 HC9703Flat mast groove, extras*3/4190.175105/1687/1611 at mast groove HC9108Wide3/4190.256192 5/8670.942317/16115/816 HC9704Wideat mast groove, extras*3/4190.256107/16115/816*Extra slug kit for HC8811 track. Order one kit in addition to HC9106, HC9107 or HC9108 for sail headboard location at full hoist and one kit for each reefed headboard location.TrackPart Length Width Weight Fasteners Fastener spacingNo. Description in mm in mm oz g mm mm Slug MountHC8798Switch/short246102 5/867329075 HC8799Switch/long33 3/48572 5/8674713365HC8811 reef point reinforcementHC8800T-Track80 13/16205127/322126.77585100HC8811T-Track/high-load**80 13/16205127/322126748550/100 Drill/Tap3 HC10417Switch***33 3/48577626.7758575 HC78273 m T-Track118 1/8300023/321838.91106575HC95972 m T-Track/high load78 3/4200023/321825.5723550HC8230Splice link7/8221/83.20.020.57DRILL/TAP ** Use HC8811 high-load track on upper part of mast to reinforce HL system headboard locations. Mount using 50 mm hole spacing at headboard location at full hoist and headboard location at each reef point. Reduce weight in other areas by alternating holes to 100 mm spacing. ***Switch may be shortened to 605 mm (23 13/16"). 143'