b'Hydraulic Reservoirs Pump HandlesHarken offers pressurized carbon fiber/composite reservoirs and vent- Standard round-tipped handles are made of knurled ed blow-molded reservoirs for manual hydraulic systems.6061-T6 hardcoat-anodized aluminum and fit standard Pressurized ReservoirsHYPM1 and HYMP2 pumps. Grand Prix versions are All Harken pressurized reservoirs have translucent sections in the res- available in carbon fiber. An optional square-tipped style ervoir walls, making it easy to monitor oil levels. Pressurized reser- allows the handle to be rocked 5 degrees laterally from voirs require very little maintenance and are cleaner than those thatthe pumping direction to store against the cockpit wall.use ambient air pressure. They can be installed in the bilge rather than at pump level to provide a low center of gravity. Grand-Prix Pressurized Reservoirs Harken offers Grand-Prix pressurized reservoirs to suit any GrandCARBON FIBER HANDLEPrix need. They are among the lightest in existence. Reservoirs can be built with up to three ports on each end, customiz-able to whatever application is required. One-way return-line check valves, supply-line shutoff valves, and high-quality regulators are available to meet specific needs. Custom sizes and configurations are available. Contact Harken. Vented ReservoirsALUMINUM HANDLEHarken offers 2- and 4-liter blow-molded reservoirs for standard installations. Reservoirs feature a vented cap to stabilize tank pres-sure and prevent leaks. Translucent materials allow oil levels to be easily monitored. 10 mm (3/8") hose barbs come standard for supply and return hoses.GRAND-PRIX VENTED RESERVOIRS PRESSURIZED RESERVOIRS PRESSURIZED RESERVOIRSMaximum Oil Maximum dimensionsPart capacity capacity Height Width Depth WeightNo. Description gal L gal L in mm in mm in mm lb kg HYRPC02Pressurized composite reservoir0.520.321.212.23106.31605.81482.10.97 HYRPC04Pressurized composite reservoir1.140.632.417.94556.31605.81482.81.28HYRPC08Pressurized composite reservoir2.181.24.731.27936.31605.81484.31.96HYRPC10Pressurized composite reservoir2.6101.65.937.29466.31605.81485.22.34HYRVP02Vented blow-molded reservoir0.520.41.57.11818.72204.11050.80.36HYRVP04Vented blow-molded reservoir1.140.8311.72988.72204.11051.20.55Additional sizes available. Contact Harken.Pump Handles Length WeightPart No. Description in mm in mm lb kgHYPMH6600Pump handle 600 mm/aluminum1 1/43223 5/86001.20.56HYPMH6800Pump handle 800 mm/aluminum1 1/43231 1/28001.50.7HYPMHC800Pump handle 800 mm/carbon1 1/43231 1/28001.00.45ber HYPMHC800SPump handle 800 mm/carbon1 1/43231 1/28001.00.45ber/square tip HYPMHC1000Pump handle 1000 mm/carbon1 1/43239 3/810001.20.53ber HYPMHC1000SPump handle 1000 mm/carbon1 1/43239 3/810001.20.53ber/square tip 244'