b'Fire Engineering Assessment, Revision 01 DeltaCool, DeltaSecrectFix, DeltaTrim at 100 mm and 75 mm Fire Performance, Project No. 25367 25367-SFE-FEA-01-Delta Panel Fire Performance 4)Where a Performance Requirement is proposed to be satisfied by a Performance Solution, the following steps must be undertaken: a.Prepare a performance-based design brief in consultation with relevant stakeholders. b.Carry out analysis, using one or more of the Assessment Methods listed in 2., as proposed by the performance-based design brief. c.Evaluate results from b. against the acceptance criteria in the performance-based design brief. d.Prepare a final report that includes i.all Performance Requirements and/or Deemed-to-Satisfy Provisions identified through A2G2(3) or A2G4(3) as applicable; and ii.identification of all Assessment Methods used; and iii.details of steps a. to c.; and iv.confirmation that the Performance Requirement has been met; and v.details of conditions or limitations, if any exist, regarding the Performance Solution. B.2Compliance Solution MethodologyThe following describes the mandatory process which must be followed when documenting a Performance Solution.NCC Clause A2G4 states: 1)PerformanceRequirementsmaybesatisfiedbyusingacombinationofPerformanceSolutionsand Deemed-to-Satisfy Solutions. 2)When using a combination of solutions, compliance can be shown through the following, as appropriate: a.A2G2 for assessment against the relevant Performance Requirements. b.A2G3 for assessment against the relevant Deemed-to-Satisfy Provisions. 3)Where a Performance Requirement is satisfied by a Performance Solution in combination with a Deemed-to-Satisfy Solution, in order to comply with (1), the following method must be used to determine the Performance Requirement or Performance Requirements relevant to the Performance Solution: a.Identify the relevant Deemed-to-Satisfy Provisions of each Section or Part that are to be the subject of the Performance Solution. b.Identify the Performance Requirements from the same Sections or Parts that are relevant to the identified Deemed-to-Satisfy Provisions. c.Identify Performance Requirements from other Sections or Parts that are relevant to any aspects of the Performance Solution proposed or that are affected by the application of the Deemed-to-Satisfy Provisions that are the subject of the Performance SolutionPage 33'